產品名稱：大量批發PCN400型全自動運動粘度測定儀
產品型號：
產品報價：
產品特點：大量批發PCN400型全自動運動粘度測定儀可測量透明及不透明液體到同樣精度，包括原油、輕重質燃料油、潤滑油、添加劑、 廢油的運動粘度。也適用于測量含蠟量高樣品， 或含有在室溫下不溶化成分樣品的運動粘度。 全自動進樣、恒溫、粘度測試、清洗、干燥粘度計， 不需人員隨機操作，操作員在放樣后， 可以離開現場，儀器可以自動完成全部任務。
大量批發PCN400型全自動運動粘度測定儀的詳細資料：
PCN400型全自動運動粘度測定儀
可測量透明及不透明液體到同樣精度，包括原油、輕重質燃料油、潤滑油、添加劑、 廢油的運動粘度。也適用于測量含蠟量高樣品， 或含有在室溫下不溶化成分樣品的運動粘度。 全自動進樣、恒溫、粘度測試、清洗、干燥粘度計， 不需人員隨機操作，操作員在放樣后， 可以離開現場，儀器可以自動完成全部任務。
執行標準：符合GB/T265，ASTM D445,D446,ISO3104,ISO3105標準
PCN400型全自動運動粘度測定儀
技術參數 ：
1. 溫度范圍：室溫～１5０℃，控溫精度：±0.01℃；（全范圍任意可調）。用戶可選配制冷設備，進行低溫粘度的測定。 重復性：≤0.01S 再現性：≤0.02S
2運動粘度測量范圍：0.4 、0.6、0.8、1.0、1.2、1.5、、2.0、3.0由用戶按需要選擇烏式粘度計，更換方便只用一分鐘左右。粘度計如有特殊要求，公司也可以訂做相應的粘度計。
3. 顯示： 7 寸彩色液晶顯示屏。，圖文顯示細膩無鋸齒，顏色艷麗，顯示分辨率高；塑料注塑的一體化顯示屏面框美觀大方；全中文操作界面，顯示直觀。同時，具備權限管理功能，有效避免非專業人員對本測定儀關鍵參數進行設定。
4. 檢測孔數; 兩孔，可以同時做平行樣或者不同的粘度計檢測。兩孔檢測互不干擾。
5．清洗裝置：脈沖式清洗器，反復清洗粘度計，
6. 輸入系統: 觸摸屏輸入，采用人體感應式觸摸按鍵，無機械觸點，防塵防水，抗射頻干擾，使用壽命長。也可以外接鍵盤輸入，
7. 檢測裝置; 紅外線檢測器檢測粘度計（光電檢測），安全準確可靠，
8：安全功能; 儀器自帶加熱浴安全保護功能，如果出現加熱裝置不可控的狀況下，只要達到儀器zui高限定溫度155℃，儀器就會自動關斷，防止出現著火或浴缸爆裂事故。
9; 打印功能; 儀器內置微型熱敏打印機，其打印更安靜、快速、清晰。實驗結果可以自動打印。
10：誤差修正：用戶可根據實際情況設定參數，其可快速計算測定結果與誤差，若測定結果超差本測定儀將自動進行重新測定，直至滿足誤差要求。
11. 外部輸出: RS-232C 標準接口能與PC機連接，也可以連接LIMS系統
12：電源電壓： AC220V±10％，50HZ±2HZ
13：整機功率：小于1200W ；
PCN400型全自動運動粘度測定儀
主要特點 ：
•采用單片機控制，液晶觸摸屏操作
•測量過程包括：恒溫、粘度測試、清洗、烘干全過程自動化。
•操作員在放樣后,可以離開現場,儀器可以自動完成全部任務；
•實驗程序可調出、修改，并無限添加；
•實驗結果可儲存100條實驗結果，隨時查閱并打印，進行多次數據的重復性、再現性比較和計算；
儀器自帶照明裝置，方便試驗中觀察粘度計的測量和清洗
•內置強大的自檢功能系統，設有自動診斷故障程序，操作更加可靠；
•根據用戶需要可增加制冷設備；
•內部設計RS-232C 標準接口電路，可與PC機連接；也可以連接LIMS系統
粘度指數和賽波特通用粘度自動計算 , 具計算機自我故障診斷程序
可對高粘度及含蠟樣品盤和廢液排放系統進行預熱 ( 50℃ ～ 100℃ )
外形尺寸：650×500×420（mm）
PCN400 Automatic Kinematic viscosity testers
Same accuracy to the measurement of transparent and opaque liquids, including crude oil, light and heavy fuel oils, lubricants, additives, waste oil kinematic viscosity. Also suitable for measuring the amount of wax-containing high-sample, or contains the kinematic viscosity of the composition sample at room temperature without melting. Automatic injection, constant temperature, viscosity testing, cleaning, drying viscometer without random operations, the operator in the loft, you can leave the scene, the instrument can automatically complete all tasks.
Executive Standard: conform GB/T265, ASTM D445, D446, ??ISO3104, ISO3105 standards
Technical parameters:
1. Temperature range: room temperature to 150 ° C, temperature control accuracy: ± 0.01 ° C; (full range adjustable). User optional refrigeration equipment, the determination of the low-temperature viscosity. Repeatability: ≤ 0.01S reproducibility: ≤ 0.02S
The 2 kinematic viscosity measurement range: 0.4 0.6,0.8,1.0,1.2,1.5, 2.0, 3.0, by the user as needed to select a Ubbelohde viscometer, easy to replace with only a minute or so. If you have special requirements viscometer viscometer, the company can also be customized.
3: 7-inch color LCD screen. Delicate, graphic display non-serrated, bright colors, high resolution; nice box integrated display surface of the plastic injection molding; Chinese user interface, intuitive display. At the same time, with rights management functions, effective way to avoid the non-professionals to set the key parameters of the analyzer.
. Detect the number of holes; two holes at the same time to do parallel samples or different viscometer detector. Two holes detected without disturbing each other.
5. Cleaning device: pulse cleaning, repeated washing viscometer
Input system: touch screen input, using the human body sensor touch buttons, no mechanical contact, dust and water resistance to radio frequency interference, and long service life. External keyboard input
7. Detection device; detect infrared detector the viscometer (photoelectric detection), safe, accurate and reliable,
8: security features; instrument comes with heating the bath safety protection function, If not controlled heating device status, if it reaches the instrument limited the maximum temperature 155 ℃, the instrument will automatically shut off to prevent fire or bath Bursting.
9; Print function; instrument built-in mini thermal printer, print more quiet, fast and clear. The experimental results can be printed automatically.
10: Error Correction: The user can set the parameters according to the actual situation, which can quickly calculate the determination of the results of the error, the difference between the measurement results super meter will automatically re-determination, until you meet the error requirement.
11 external output: RS-232C standard interface can be connected with a PC can also be connected to the LIMS system
12: Power supply voltage: AC220V ± 10%, 50HZ ± 2HZ
13: Total power: less than 1200W;
Main features:
• MCU control, LCD touch screen operation
• measurement process include: constant temperature, viscosity testing, cleaning, drying, automation of the whole process.
• operator in the loft, you can leave the scene, the instrument can automatically complete all tasks;
• Experimental procedures adjustable to, modify, add and infinite;
• The experimental results can be stored for 100 experimental results, the right to access and print multiple data repeatability, reproducibility comparisons and calculations;
The instrument comes with lighting means to facilitate the measuring and cleaning of observed test viscometer
• Built-in self-test function system with automatic diagnostic fault program, more reliable operation;
• Depending on the user needs to increase the refrigeration equipment;
• Internal design RS-232C standard interface circuit, can be connected with the PC; LIMS system can also be connected
Viscosity index and Saybolt Universal Viscosity automatically calculated with computer self fault diagnosis procedures
Of high viscosity and wax tray and wastewater discharge system preheated (50 ° C and at 100 ° C)
Dimensions: 650 × 500 × 420 (mm)
| 如果你對大量批發PCN400型全自動運動粘度測定儀感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系： |
